Xtramus APMPT-4 V2.4 Manuel d'utilisateur télécharger pdf (Page 94)

E-mail: sales@xtramus.com

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

B. Transmit

 Frame Length Setting: As shown in the figure down below, in a standard Ethernet II frame, the

Frame Length can be from 64~1518 bytes.

By clicking the Frame Length scroll-down menu, you can set the frame length to random (frame

length will be randomly assigned from 64~1518 bytes) or fixed (frame length will be a fixed

number). If you choose fixed as your Frame Length, you can set the frame length in the field

down below.

 Packet Setting: You can set how packets will be transmitted in this field.

 Total Packet Count: The total amount of packets that will be transmitted for this test.

 TxPkt Timeout: If the system fails to send the test packet within the time you set here, the

packet will be drop.

 Tx Payload: You can set the content of the transmitting packets with the Payload

scroll-down menu.

 T/L（0X）： You can set the T/L (0X) after MAC address in this field.

 Packet Gap Setting: You can set the gaps between packets in this field.

 Frame Gap: Duration time between frames. Increasing Frame Gap reduces the fail rate, while

96 bit-time is wirespeed.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 144 145

Pas de commentaire

Xtramus APMPT-4 V2.4 Manuel d'utilisateur Page 94