Xtramus APMPT-4 V2.4 Manuel d'utilisateur télécharger pdf (Page 84)

E-mail: sales@xtramus.com

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

5.4.5. POE Loading

A. Setup

The table showed in the Setup tab menu contains:

 Port: The Active Port that is used for the PoE test.

 Module: The module card that is used for the PoE test.

 Class: You can select the power class for the DUT here. The power class available for APMPT-4 is

listed in the table down below.

 Load (Watt): Set the loading power. When your setting here is out of the range set in Class field, the

set value will turn red as a warning, as shown in the picture down below. If your setting is out of your

module cards limit loading, then the setting will be denied.

 Prepare Load (Watt): Set the power for starting a test.

 Prepare Load Time (ms): Set the time for starting a test.

 Alter. : A network cable contains 4 twisted pair (8 totally) copper wire. The Alternative function can

Class

Power range (Watt)

0.44 to 12.95

0.44 to 3.84

3.84 to 6.49

6.49 to 12.95

802.3af: Reserved

802.3at：≥12.95

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 144 145

Pas de commentaire

Xtramus APMPT-4 V2.4 Manuel d'utilisateur Page 84