Xtramus NuApps-G8261-RM V1.0 Manuel d'utilisateur télécharger pdf (Page 47)

E-mail: sales@xtramus.com

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

4.9.6. G.8261 Test Case 12

Test Setting

Duration (Secs)

The duration of time (in seconds) for the test. The range for the testing time is

3~30000.

Rate (%)

The network traffic rate (%) for the Test Pair Port.

Frame Size (bytes)

The size of the test packets. The range of the Starting from/at field is 60~1514.

Frame Gap (bits)

The idle period between transmission of Ethernet frames. This field will change

according to the frame size you set.

Rate (packet/sec)

The transmitting rate (packets transmitted per second) for the test. This field will

change according to the frame size you set.

Ping Times

As a network utility, Ping is widely used for testing if one specific host is

reachable through its IP address. You can set how many times you would like to

perform the ping command.

Packet Payload

This scroll-down menu allows you to set packet contents to Random, Increase,

0×55AA, 0×00FF, All 1 or All 0.

Criteria

Latency (µs)

The criteria set here will be used to determine if the DUT meets the requirement.

You can set the Latency (µs) here.

Jitter (µs)

The criteria set here will be used to determine if the DUT meets the requirement.

You can set the Jitter (µs) here.

Network Load Setting – Forward/Reverse

Load Rate (%)

The starting network traffic rate for the Load Pair Port.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 59 60

Pas de commentaire

Xtramus NuApps-G8261-RM V1.0 Manuel d'utilisateur Page 47