Xtramus NuApps-SwitchPerform V1.8 Manuel d'utilisateur télécharger pdf (Page 15)

After starting NuApps-SwitchPerform, a Select Config window will pop up. You can choose if you would

like to Open an Existing Configuration or Create a New Configuration. Please press OK to continue.

Description – Select Config

As mentioned above, you have to reserve ports on module cards before performing tests with

NuApps-SwitchPerform. You can do so by either Open an Existing Configuration or by Create a New

Configuration.

Open an Existing Configuration

If you have a previously saved configuration file

stored in your PC, you can load it and apply all

the setting you’ve made by choosing “Open an

Existing Configuration” from the Select

Config pop-up window.

Configuration files are saved in the format of

“＊.cfg”.

Create a New Configuration

If you are running NuApps-SwitchPerform for

the first time or you would like to create a new

configuration, please choose “Create a New

Configuration” from the Select Config pop-up

window.

For more information regarding to creating a

new configuration for NuApps-SwitchPerform,

please refer to 4.5. Test Configuration on page

25.

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Pas de commentaire

Xtramus NuApps-SwitchPerform V1.8 Manuel d'utilisateur Page 15